EXMARK VANTAGE S-SERIES
Patented Mechanical Control System
With its solid rods, there are no cables to stretch, and no annoying loss of ground speed.
Now with Propane
The Vantage S-Series is now available with propane technology and a 52" UltraCut Series 4 full-floating deck.
Adjustable Front Reference Bar
Ergonomically designed steering system includes an adjustable front reference bar that can control the top end speed of the machine.
Zero Maintenance Spindles
Made from rugged, cast aluminum with sealed bearings, our spindles are designed to withstand the effects of moisture and impacts, with no annual greasing required.
Operator Platform
A rubber platform with self-compensating suspension provides a comfortable ride for any size rider. Patented, integrated thigh pads also pivot away, allowing easy access for maintenance. Folds up for reduced trailering space.
Hydro-Drive
Smoother operation and consistent control is made possible with our new 12 cc pump and 230 cc wheel motor.
Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 18 x 8.5-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 15-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kawasaki® Engine Model FS541V Engine Type Carbureted Engine Series V-Twin Engine Speed 3,600 rpm Engine Displacement 603 Air Filter Standard Engine Manufacturer's air filter Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 175 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Gas Carbureted
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 36" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 2 Blades at 18" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 48.0 in. (121.9 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 790 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 15-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kawasaki® Engine Model FX691V Engine Type Carbureted Engine Series V-Twin Engine Speed 3,600 rpm Engine Displacement 726 Air Filter Standard Engine Manufacturer's air filter Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Gas Carbureted
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 48" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 16.25" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 59.6 in. (151.4 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 855 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" tubular steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 15-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kawasaki® Engine Model FX691V Engine Type Carbureted Engine Series V-Twin Engine Speed 3,600 rpm Engine Displacement 726 Air Filter Standard Engine Manufacturer's air filter Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Gas Carbureted
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 48" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 16.25" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 59.6 in. (151.4 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 855 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 15-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kawasaki® Engine Model FX691V Engine Type Carbureted Engine Series V-Twin Engine Speed 3,600 rpm Engine Displacement 726 Air Filter Standard Engine Manufacturer's air filter Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Gas Carbureted
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 52" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 18" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 64.8 in. (164.6 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 866 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 15-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kawasaki® Engine Model FX691V Engine Type Carbureted Engine Series V-Twin Engine Speed 3,600 rpm Engine Displacement 726 Air Filter Standard Engine Manufacturer's air filter Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Gas Carbureted
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 52" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 18" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 64.8 in. (164.6 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 866 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Hydo drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model ECV730 Engine Type Electronic Fuel Injected Engine Series Command™ EFI Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Gas EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 52" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 18" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 64.8 in. (164.6 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 866 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Hydo drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model ECV730 Engine Type Electronic Fuel Injected Engine Series Command™ EFI Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Gas EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 52" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 18" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 64.8 in. (164.6 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 866 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model ECV740 Engine Type Electronic Fuel Injected Engine Series Command™ EFI Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant No Fuel Type Gas EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 60" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 20.50" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 72.8 in. (184.9 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 883 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model ECV740 Engine Type Electronic Fuel Injected Engine Series Command™ EFI Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 8-gallon (30.3-L), single fuel tank with single fill location. Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant No Fuel Type Gas EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 60" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 20.50" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 72.8 in. (184.9 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 883 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 21 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model PCV740 Engine Type EFI Propane Engine Series Command™ EFI Propane Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 33.5-lb propane tank Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Propane EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 52" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 18" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 64.8 in. (164.6 cm) Length 75 in. (188 cm) Height 51 in. (127 cm) Curb Weight 885 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Twin levers with no-tools adjustable front reference bar to modify ground speed. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 21 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model PCV740 Engine Type EFI Propane Engine Series Command™ EFI Propane Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 10 cc pumps powering two Parker 12 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 33.5-lb propane tank Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Propane EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 52" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 18" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 64.8 in. (164.6 cm) Length 75 in. (188 cm) Height 51 in. (127 cm) Curb Weight 885 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model PCV740 Engine Type Electronic Propane Engine Series Command™ EFI Propane Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 33.5-lb propane tank Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Propane EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 60" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 20.50" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 72.8 in. (184.9 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 893 Equipment
Tractor Frame Welded, heavy-duty 1.5" x 3" steel. Steering Control Hydro drive with Enhanced Control System (ECS), forward/reverse, left/right or zero-turn. Front Caster Tires 11 x 4.0-5, smooth-tread, semipneumatic tires. Drive Tires 20 x 10.50-8 Kenda Tires Parking Brake Lever-actuated bar brake. Blade Spindles No maintenance, sealed and nongreaseable spindles; 7.75" diameter cutter housing with 1.75" diamter splined blade driver 1.0"-diameter spindle shaft. Electrical 12-volt battery with 20-amp alternator. Cup Holder Optional Casters .38" thich double-yoke, smooth tread caster wheel assembly with pre-installed bearing cups. Power Components
Engine Brand Kohler® Engine Model PCV740 Engine Type Electronic Propane Engine Series Command™ EFI Propane Engine Speed 3,600 rpm Engine Displacement 747 Air Filter Heavy-duty canister air filtration system Drive Description Two Hydro Gear 12 cc pumps powering two Parker 14 cubic inch motors. Speed Infinitely variable speed selection 0-8.0mph (12.9 kmph) forward, 0-4.0 mph (6.4 kmph) PTO Engagement Warner 200 ft-lb clutch Fuel Capacity 33.5-lb propane tank Fuel Indicator Yes - Float Gauge Drive Wheel Release Allows unit movement without engine running. Safety Package Operator Presence Controls (OPC) with safety interlock system indicators Deck Lift Standard; mechanical lift-assist springs. Carb Compliant Yes Fuel Type Propane EFI
DecksDeck Construction 10-gauge top that is formed and continuously seam welded, 7-gauge side skirt and 7-gauge formed and welded spindle mounting locations for improved strength and reduced weight. Deck Style Floating Deck Deck Style Description Full-floating UtraCut Series 4. Side discharge standard, with molded discharge chute and option to bag or mulch. Width / Cutting Deck 60" Cutting Heights 1.0" (2.54 cm) to 5.0" (12.7 cm) in 0.25" (0.64 cm) increments adjustable from the operator position Blades 3 Blades at 20.50" Length Blade Tip Speed Approximately 18,500 fpm
Dimensions
Width 72.8 in. (184.9 cm) Length 74 in. (188 cm) Height 50 in. (127 cm) Curb Weight 893 Patented Mechanical Control System
With its solid rods, there are no cables to stretch, and no annoying loss of ground speed.
Now with Propane
The Vantage S-Series is now available with propane technology and a 52" UltraCut Series 4 full-floating deck.
Adjustable Front Reference Bar
Ergonomically designed steering system includes an adjustable front reference bar that can control the top end speed of the machine.
Zero Maintenance Spindles
Made from rugged, cast aluminum with sealed bearings, our spindles are designed to withstand the effects of moisture and impacts, with no annual greasing required.
Operator Platform
A rubber platform with self-compensating suspension provides a comfortable ride for any size rider. Patented, integrated thigh pads also pivot away, allowing easy access for maintenance. Folds up for reduced trailering space.
Hydro-Drive
Smoother operation and consistent control is made possible with our new 12 cc pump and 230 cc wheel motor.
EXMARK and any EXMARK trademarks in use on this site are registered trademarks of EXMARK MFG. CO., INC. This applies to all graphical elements that bear the EXMARK logo and any marketing materials that are not provided by the website creators which bear EXMARK equipment, logos, etc. The EXMARK logo is the property of EXMARK and is a registered trademark of EXMARK MFG. CO., INC. All product specifications and descriptions in regards to EXMARK products are provided by EXMARK and are the intellectual property of EXMARK MFG. CO., INC.
