UltraCut Deck Technology
Exmark's exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark's exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.Heavy Duty Unibody Frame
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.Quick Adjustable Rollover Protection System (ROPS)
Uses an easy-tu-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.Fuel Gauge Window
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.Height of Cut Made Easy
The height of cut is positioned to proide an open operator platform that allows the operator to quickly locate the preferred cut position when viewing from the top down.Large Caster Tires
Every Radius model is equipped with large front caster tires. 13" x 6.5" pneumatic tires come standard on all Radius models.Powered by Exmark Engine
Equipped with Exmark's commercial-grade 24.5-horsepower 708cc V-Twin engine that features a dual barrel carburetor, cast iron cylinder liners and a quick oil drain hose raises the bar for productivity, durability and value.Equipment
Blade Spindles
No maintenance, sealed and non-greasable; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive. Drive Tires 22 x 9.5-12 K500 Cup Holder Standard Tractor Frame Unibody, welded, heavy-duty rectangular tubular steel. Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Bushings. Parking Brake Lever-actuated pawl brake. Seat High back seat with foam padded seat cushion, armrests and integral safety switch. Electrical 12-volt battery with 15-amp alternator. Power Components
Engine Brand Exmark Engine Model 708 Engine Displacement 708 Engine Series V-Twin Engine Type Carbureted Engine Speed 3,600 rpm Air Filter Standard Engine Manufacturer's air filter. Fuel Type Gas Carbureted Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location. Fuel Indicator Translucent Visual Drive Hydro-Drive Drive Description Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. Speed Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. Carb Compliant No Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Safety Package Operator Presence Control (OPC) and drive system interlock, with safety interlock system indicators. ROPS 2-post foldable ROPS standard with seat belt and latch. PTO Engagement MagStop electromagnetic 125-ft-lb clutch. Drive Wheel Release Allows unit movement without engine running Casters .375" thick caster yoke arms. Decks
Width / Cutting Deck 48" Deck Style Floating Deck Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. Blade Tip Speed Approximately 18,500 fpm. Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. Blades 3 Blades at 16.25" Length Dimensions
Width 59.5 in (151.1 cm) Length 81.7 in (207.5 cm) Height 69.7 in (177.0 cm) Curb Weight 849 Equipment
Blade Spindles
No maintenance, sealed and non-greasable; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive. Drive Tires 22 x 9.5-12 K500 Cup Holder Standard Tractor Frame Unibody, welded, heavy-duty 2" x 3" rectangular tubular steel. Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Bushings. Parking Brake Lever-actuated pawl brake. Seat High back seat with foam padded seat cushion, armrests and integral safety switch. Electrical 12-volt battery with 15-amp alternator. Power Components
Engine Brand Exmark Engine Model 708 Engine Displacement 708 Engine Series V-Twin Engine Type Carbureted Engine Speed 3,600 rpm Air Filter Standard Engine Manufacturer's air filter. Fuel Type Gas Carbureted Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location. Fuel Indicator Translucent Visual Drive Hydro-Drive Drive Description Dual Hydro Gear ZT2800, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. Speed Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. Carb Compliant No Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Safety Package Operator Presence Control (OPC) and drive system interlock, with safety interlock system indicators. ROPS 2-post foldable ROPS standard with seat belt and latch. PTO Engagement MagStop electromagnetic 125-ft-lb clutch. Drive Wheel Release Allows unit movement without engine running Casters .375" thick caster yoke arms. Decks
Width / Cutting Deck 52" Deck Style Floating Deck Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. Blade Tip Speed Approximately 18,500 fpm. Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. Blades 3 Blades at 18.00" Length Dimensions
Width 64.3 in (151.1 cm) Length 81.7 in (207.5 cm) Height 69.7 in (177.0 cm) Curb Weight 862 Equipment
Blade Spindles
No maintenance, sealed and non-greasable; 7.30"-diameter cutter housing contains 17mm (.67") diameter spindle shaft and hex blade drive. Drive Tires 22 x 10.5-12 K500 Cup Holder Standard Tractor Frame Unibody, welded, heavy-duty 2" x 3" rectangular tubular steel.
Steering Control Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Front Caster Tires 13 x 6.5-6, smooth tread, pneumatic. Bushings. Parking Brake Lever-actuated pawl brake. Seat High back seat with foam padded seat cushion, armrests and integral safety switch. Electrical 12-volt battery with 15-amp alternator. Power Components
Engine Brand Exmark Engine Model 708 Engine Displacement 708 Engine Series V-Twin Engine Type Carbureted Engine Speed 3,600 rpm Air Filter Standard Engine Manufacturer's air filter. Fuel Type Gas Carbureted Fuel Capacity 7-gallon (26.5-L) single fuel tank with single fill location. Fuel Indicator Translucent Visual Drive Hydro-Drive Drive Description Dual Hydro Gear ZT3100, hydrostatic transmission with charge pumps, relief valves and independent, replaceable filters. Speed Infinitely variable speed selection from 0-8.0 mph (12.9 kmph) forward, 0-5.0 mph (8.0 kmph) reverse. Carb Compliant No Deck Lift Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Safety Package Operator Presence Control (OPC) and drive system interlock, with safety interlock system indicators. ROPS 2-post foldable ROPS standard with seat belt and latch. PTO Engagement MagStop electromagnetic 125-ft-lb clutch. Drive Wheel Release Allows unit movement without engine running Casters .375" thick caster yoke arms. Decks
Width / Cutting Deck 60" Deck Style Floating Deck Deck Style Description Full-floating UltraCut Series 3. Side discharge standard, with molded discharge chute and option to bag or mulch. Deck Construction 10-gauge high strength alloy top that is formed and continuously seam welded, with 7-gauge side skirt. Blade Tip Speed Approximately 18,500 fpm. Cutting Heights 1.5" (3.8 cm) to 5.0" (12.7 cm) in 0.25" (.6 cm) increments, adjustable from operator's seat. Blades 3 Blades at 20.50" Length Dimensions
Width 72.3 in (151.1 cm) Length 81.7 in (207.5 cm) Height 69.7 in (177.0 cm) Curb Weight 901 EXMARK and any EXMARK trademarks in use on this site are registered trademarks of EXMARK MFG. CO., INC. This applies to all graphical elements that bear the EXMARK logo and any marketing materials that are not provided by the website creators which bear EXMARK equipment, logos, etc. The EXMARK logo is the property of EXMARK and is a registered trademark of EXMARK MFG. CO., INC. All product specifications and descriptions in regards to EXMARK products are provided by EXMARK and are the intellectual property of EXMARK MFG. CO., INC.
UltraCut Deck Technology
Exmark's exclusive UltraCut decks are featured on Radius models in a choice of 48- to 60-inch cut widths. Every UltraCut cutting deck features Exmark's exclusive maintenance-free, sealed-bearing spindle assemblies for increased durability and reduced downtime, combined with zero maintenance.Heavy Duty Unibody Frame
Fully-welded using 2-inch by 3-inch frame tubes, the Radius frame design places major components including the engine, hydro drive and fuel tank lower, with better mass centralization. This gives the Radius increased hillside traction and stability, with heightened maneuverability.Quick Adjustable Rollover Protection System (ROPS)
Uses an easy-tu-fold up-and-down design built from round tubes and provides flexibility for placement of accessories.Fuel Gauge Window
Easy-to-use, accurate sight window-type fuel gauge is standard on all Radius models.Height of Cut Made Easy
The height of cut is positioned to proide an open operator platform that allows the operator to quickly locate the preferred cut position when viewing from the top down.Large Caster Tires
Every Radius model is equipped with large front caster tires. 13" x 6.5" pneumatic tires come standard on all Radius models.Powered by Exmark Engine
Equipped with Exmark's commercial-grade 24.5-horsepower 708cc V-Twin engine that features a dual barrel carburetor, cast iron cylinder liners and a quick oil drain hose raises the bar for productivity, durability and value.
Or Call for a Quote: (360) 568-3500
